Datacentre

1U Patchcord Storage Shelf

The SRS3000 Patchcord Storage Shelf is a 1U shelf used for the storage of patchcords or the storage of patchcord overlength. The shelf can be installed in to 19” / ETSI / ANSI racks, street side or wall mounted cabinets. The product consists of a metal chassis and a plastic light weight module. The product has a capacity of up to 48 patchcords in a 1U unit. Features and Benefits Suitable for installation into 19”, ETSI and ANSI racks. Can be used to store patchcords prior to installation or to store patchcord overlength. Storage capacity of up to 2 metres of 24 patchcords 2.8mm in diameter or 48 patchcords of 2.0mm in diameter. Overlength capacity of up to 2.5 metres of...

3U Horizontal Routing and Storage Shelf

The Horizontal Routing and Storage Shelf is a 3U shelf used to transport patchcords from one side of a 19” or ETSI rack to the opposite side. The shelf can also be used as a patch cord storage shelf for the storage of patch cord over-lengths. Manufactured from the steel, the shelf contains two routing mandrels for the coiling of the patch cord over-lengths. The shelf fits directly into 19” racks and cabinets and can also be mounted into ETSI racks and cabinets using the conversion brackets supplied, it can also be rear mounted using additional brackets upgrades (available separately). Features and Benefits 3U shelf for 19”, ETSI or rear rack mounting. ETSI mounting is achieved using conversion brackets supplied. Rear...

Adaptor Face Plates for SRS4000

The Adaptor Face Plates kit are fitted into the 1, 2 or 3U SRS4000 Splice and Patch Shelves. Each Adaptor Face Plate fits half of 1U. The Adaptor Face Plates can be used to install into an unconfigured Splice and Patch Shelf or can be used to upgrade an existing shelf. Kit ContentsThe kit comprises of an adaptor faceplate and adaptors. Single-Mode Patch Upgrade Kits (Adaptors + faceplate) CodeDescriptionAdaptor ColourXSRSC00145SC/UPC 12f Duplex S/ modeBlueXSRSC00146SC/UPC 24f Quad S/ modeBlueXSRSC00148SC/APC 12f Duplex S/ modeGreenXSRSC00149SC/APC 24f Quad S/ modeGreenXSRSC00153LC/UPC 24f Duplex S/ modeBlueXSRSC00155LC/APC 24f Duplex S/ modeGreen   Multi-Mode Patch Upgrade Kits (Adaptors + faceplate) Code DescriptionAdaptor ColourXSRSC00151SC/UPC 12f Duplex MMBeigeXSRSC00157LC/UPC 24f Duplex MMBeige Other configurations are available upon request. Please contact Prysmian to discuss your requirements

SRS4000 Distribution Sub-Rack

The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19” / ETSI / ANSI racks, street-side cabinets or wall mounted cabinets. The product consists of a metal chassis available in 1U, 2U and 3U into a which a choice of modules are loaded. The module types available are Splice and Patch, Patch Only, Splice Only, Patchcord Storage and Connectorised Splitter. This allows users to customise the product for different applications whilst using the same building blocks in each sub-rack. The Splice and Patch, Splice Only and Patch Only modules can be supplied in 12, 24, 48 or 96* fibre capacities in a 1U unit. They are supplied with a range of connector types for...

UC9500 Front-Panels

Prysmian offers a range of Front-Panels compatible with UC9500 Fiber Patch Panel Series. Features and Benefits Cold rolled steel Plate, thickness 1.2mm Powder Coating (water mark) Easy snap latches fixtures 6x port per panel Gongs nails to firmly secure the adaptors Blank panel is available Adaptor available in below options Multimode and Singlemode LC Duplex or Quadplex SC Simplex or Duplex FC Simplex ST Simplex MPO or MTP® Type A or Type B MPO-8, MPO-12 and MPO-24 Base compatible

UC9500 Module MPO/MTP® Universal Cassette

UC9500 Module MPO/MTP® LC-Duplex is designed specifically to fit UC9500 Patch Panel. Design and engineered to reduce total cost of ownership when deployed with 12-Fibre MPO-MPO, or 12-Fibre MTP®-MTP® fibre trunks. This module supports the popular 2-fibre 10Gb up to the next generation 25Gb/40Gb/100Gb/400Gb applications. MTP® is a registered 12-fibre MPO connector, trademark of USCONEC. Features and Benefits Installed with Draka BendBright®-XS bend-insensitive fibre Installation is simple, with the module being easily installed, or removed, using push-pull mechanism, no tools required. Available in 6 Duplex LC (front) to 1 Male/Female MPO (rear), 12 Duplex LC (front) to 2 Male/Female MPO (rear). USCONEC MTP® available upon request. Standard density up to 96F per one RU Factory terminated and tested fibre connectors allows...

UC9500 Series Standard Patch Panel

UCCONNECT® UC9500 series Light Weight Fibre Suite is designed for the use in the Entrance Room, Horizontal Distribution Areas and Equipment Distribution Areas in the exchange offices or date centres. The UC9500 Series Standard Patch Panels consist of a 1.2mm thickness steel chassis that can mount to standard EIA 19" rack rails. The products have sleek design and feel, water painted surface, abrasion resistance and highly durability. Each 1U unit has 4 slots to be equipped with either modular adaptor panels with easy fixtures or modular cassettes pre-fit with male 12F/24F MPO/MTP® to fanout LC/SC assemblies. Blank plate is available for the unused slots. They can be configured for OSP cable termination, or optical cable plug and play termination and patching. Available applications...

UC9500 Splice Tray and Cover

UC9500 Splice Tray and Cover keeps the fusion splices away from accidental stress-strain, water droplets and dust particles. Features and Benefits Stackable with detachable cover High quality fingerprint and dust resistant surfaces Light weight and highly durable 24F version does not include splice protective tube 48F version include splice protective tube Compatible with UC9500 Series Stackable up to 2 splice tray per one RU

UC9600 Series Ultra High-Density Patch Panel

UCCONNECT® UC9600 series Ultra High-Density Patch Panel is designed to address all the fibre termination and patching requirement for hyper scale date centres. The chassis consist of cold-rolled steel and aluminium to balance the robust and light weight. They can be installed into 19” / ETSI / ANSI racks. The products have sleek design and feel, anodized surface, abrasion resistance and highly durability. Each 1U unit has 6 sliding slots to be equipped with modular 24F cassettes providing up to 144F capacity. The cassettes can be configurated as splice to LC or MPO/MTP® fanout to LC. Hence, they are suitable for OSP cable termination, or optical cable plug and play termination and patching. Available applications include: OSP cable terminated and spliced with LC...

UC9600 Ultra High-Density Module Cassettes

UC9600 Ultra High-Density Module Cassettes are designed specifically to fit the UC9600 series Ultra High-Density Patch Panel providing various configurations for the hyper scale date centres applications. Features and Benefits Available in Duplex LC or Uni-boot LC patch cordAvailable in G657A, OM3 and OM4Utilises bend-insensitive fibrePlug & Play InstallationQuick release mechanismMPO/MTP® Cassette available with 3xMPO-8, 2xMPO-12, 1xMPO-24Type P (Pair-Flipped) is Draka UC defacto (compatible with Type-B MPO(F) to MPO(F) Trunk Cable), Type A and B availableAvailable in 24F Splice cassette with pigtailsPre-terminate and 100% test from factoryUtilized with UC9600 1U/2U/4U Patch Panel

MPO/MTP® Trunk Cable Assemblies

Prysmian offers an extensive range of MPO/MTP® trunk cable assemblies suitable for all data centre applications. Features and Benefits Type A, B and C available MPO-8, MPO-12, and MPO-24 Base Low Loss performance MPO-F to MPO-F or MPO-M to MPO-M MPO Method A and Method B available Compatible with Type-P MPO-LC Module Female (Standard) & Male MPO/MTP Connectors Small diameter 3.0mm for MPO-8 and MPO-12, 3.8mm for MPO-24 Factory Terminated and Tested Lightweight High Density ANSI EIA/TIA 568-C .3 ISO/IEC 11801-1: 2017 / ISO/IEC 11801-2: 2017

Patchcord

Prysmian offers an extensive range of optical patchcords. All patchcords are fully qualified to Telcordia GR326 and IEC 61300 and all materials used are RoHS compliant. Patchcords can be supplied in a variety of lengths and with a variety of different connector types. Different fibre types and cable diameters are also available on request. Hybrid patchcords with different connector types on each end are also available. Please contact Prysmian for further information. Note: For the 96f/192f/288f - 1RU/2RU/3RU SRS4000 patch panels, 1.6mm diameter patch cords are recommended due to the increased density of leads. Features and BenefitsFull traceability and test certification supplied with each assembly.Ultra polish (UPC) supplied as standard and Angle polish (APC) also available. Patchcords are un-tuned. Tuned patchcords are available...

Pigtails

Prysmian offers an extensive range of optical pigtails. All pigtails are fully qualified to Telcordia GR326 and IEC61300 and all materials used are RoHS compliant. Size and length of standard pigtails are listed below. Pigtails can also be supplied in a variety of lengths, colours and different connector types for other applications and products. A part number builder is also given below to provide codes for other pigtail configurations. Features and BenefitsFull traceability and test certification supplied with each assembly.Ultra polish (UPC) supplied as standard and Angle polish (APC) also available. Pigtails are un-tuned. Tuned pigtails are available on request.G.657.A1 as standardQualified to Telcordia GR326 and IEC 61300 standards and RoHS compliant materials.Can be supplied with many different connector types such...